Prepared a master plan for, and then designed, a 23-site SCA...read more »DA system. The project included in-depth planning for station primary and backup controls, supervisory monitoring and controls, communications, integration with the main wastewater treatment plant, system implementation, and evaluation of personnel required to support the system. « read less
As part of design of new and upgraded facilities, designed n...read more »ew programmable controls. Projects include the following: • Martinez Pumping Station, Orinda Crossroads Pumping Station,Moraga Pumping Station, San Ramon Pumping Station, Lower Orinda Pumping Station « read less
ArcSine Engineering was the lead consultant on evaluation an...read more »d design of replacement electrical systems for the 700-million-gallons-per-day influent pumping station at the Sacramento Regional Wastewater Treatment Plant. The project included a new 32 MVA substation and 4kV motor control centers, feeding 17,500 horsepower of load. Systems are fully redundant and serviceable. New equipment is housed in a 4,050-square-foot building, fully integrated with site plumbing, HVAC, communications, fire protection, and alarm systems. Building and landscape architecture complement surrounding facilities. The design also included use-change of the existing 1,400-square-foot switchgear room to provide office infrastructure. « read less
Designed, furnished, and installed a SCADA system covering a...read more » 12-site municipal water system. Designed, programmed, and provided startup assistance for pumping station PLCs. « read less
Design of site-wide 12-kV power distribution for 23-acre sit...read more »e with 130,000 square feet of retail space, and coordinated with the power company for their design requirements. Designed raceways for telephone, networking, and cable TV. Coordinated with multiple utilities for special joint trenches and overhead and underground relocations. Designed site lighting including 500-stall parking lot and decorative walkway lighting. « read less
Designed SCADA for 14 sites, plus central sites. Included co...read more »mmunications evaluation. Each site required new electric service, as well as instrumentation upgrades. « read less
Analyses of renewable energy services including 100kW-200...read more »kW fuel cells, 25kW-500kW microturbines, 500kW-2MW combustion turbines, and 5kW-7MW reciprocating engines. « read less
Northern California & Oregon Engineering Company serving Redding, the Bay Area, and the surrounding Northern California area, as well as Medford, Rogue Valley, Willamette Valley, Southern Oregon, Central Oregon, Nevada, Washington, Idaho, Utah, and Arizona.